# SCM Boom Bap with MetaModule

**URL:** <https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051>\
**Category:** Patch Gallery\
**Tags:** 4mscompanypatch, boombap\
**Created:** [February 7, 2025, 7:36pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051 "2025-02-07T19:36:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ross](https://forum.4ms.info/user_avatar/forum.4ms.info/ross/32/662_2.png) [@Ross](https://forum.4ms.info/u/Ross)\
**Post date:** [February 7, 2025, 7:36pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/1 "2025-02-07T19:36:56Z")

</div>

Here’s a fun one from this week:

[SCM Boom Bap with MetaModule](https://youtu.be/Q-DzH2nKgb4)

This patch revolves around the SCM’s ability to create funky shuffled grooves. The only knob broken out from the SCM is rotate. Slip, shuffle, and skip are dialed in to very precise ranges so that the groove sounds good at all rotation states. This creates a global knob for changing the rhythm.

**External Audio Path:**  
-Main audio outputs on channel 1 and 2

**Internal Audio Path:**  
-All drums are running into an 8 channel mixer  
-A simple monophonic bass patch consisting of a square wave VCO, a VCF, and a VCA are running into the mixer.  
-The mixer is then fed into a master distortion module

**Internal Logic Path:**  
-Clocks from an LFO drive the QCD  
-Outputs from the QCD drive the SCM, a hi hat, and a snare drum  
-Outputs from the SCM clock all of the drums and the sequencer

**Internal CV Path:**  
-Voltages from a sequencer are quantized and sent to the bass patch

**MetaModule knob mappings:**  
A - SCM rotate  
B - Kick drum decay  
C - Quantizer note offset  
D - Bass filter cutoff  
E - Bass filter CV attenuverter  
F - Bass EG release time

[Fyoocha Bop .yml](https://forum.4ms.info/uploads/short-url/e2w6ddLgk3F5v5KPwUtuNpEukBs.yml) (17.7 KB)  
[Fyoocha Bop.vcv](https://forum.4ms.info/uploads/short-url/foILXjl6O7AlgVZ45noj7JLC0f3.vcv) (3.4 KB)

 ![fyoocha bop](https://forum.4ms.info/uploads/default/original/1X/bf766b1c5c7c8201b9e39e3082171a399e857cd7.jpeg)

---

<div class="post-metadata">

**Author:** ![Zymos](https://forum.4ms.info/user_avatar/forum.4ms.info/zymos/32/2311_2.png) [@Zymos](https://forum.4ms.info/u/Zymos)\
**Post date:** [February 18, 2025, 11:12pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/2 "2025-02-18T23:12:47Z")

</div>

Feeling dumb- I’m trying to sync this to a clock. I actually have a physical QCD right here, one of the first modules I ever bought several years ago.

I want to connect MM’s QCD CLK IN to a physical gate in jack. But it only gives me options to connect to output jacks. Which seems wrong, it’s an input.

Any help would be appreciated!

---

<div class="post-metadata">

**Author:** ![Ross](https://forum.4ms.info/user_avatar/forum.4ms.info/ross/32/662_2.png) [@Ross](https://forum.4ms.info/u/Ross)\
**Post date:** [February 19, 2025, 5:37pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/3 "2025-02-19T17:37:45Z")

</div>

Hey zymos, you need to replace the LFO going into the virtual QCD with a MM gate input like this:

 ![screenshot](https://forum.4ms.info/uploads/default/original/1X/0e94fd103e148518a11a6b1ba298132a98f29855.jpeg)

---

<div class="post-metadata">

**Author:** ![Zymos](https://forum.4ms.info/user_avatar/forum.4ms.info/zymos/32/2311_2.png) [@Zymos](https://forum.4ms.info/u/Zymos)\
**Post date:** [February 19, 2025, 6:47pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/4 "2025-02-19T18:47:45Z")

</div>

That’s what I was trying to do, but it only was letting me pick an output for the QCD’s clock in jacks.  
Not sure what I was doing wrong…

---

<div class="post-metadata">

**Author:** ![Ross](https://forum.4ms.info/user_avatar/forum.4ms.info/ross/32/662_2.png) [@Ross](https://forum.4ms.info/u/Ross)\
**Post date:** [October 20, 2025, 7:29pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/5 "2025-10-20T19:29:35Z")

</div>

The files for this post have been updated with our new firmware so that the suggested sample rate and block size of 32k/512 loads automatically. Enjoy! 😃

---

<div class="post-metadata">

**Author:** ![Ross](https://forum.4ms.info/user_avatar/forum.4ms.info/ross/32/662_2.png) [@Ross](https://forum.4ms.info/u/Ross)\
**Post date:** [October 20, 2025, 7:29pm UTC](https://forum.4ms.info/t/scm-boom-bap-with-metamodule/1051/6 "2025-10-20T19:29:54Z")

</div>

Did you ever get this sorted?
