# Normalization utilities for Metamodule

**URL:** <https://forum.4ms.info/t/normalization-utilities-for-metamodule/1032>\
**Category:** Feature Requests\
**Created:** [February 4, 2025, 2:57am UTC](https://forum.4ms.info/t/normalization-utilities-for-metamodule/1032 "2025-02-04T02:57:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![etcetc](https://forum.4ms.info/letter_avatar_proxy/v4/letter/e/b38774/32.png) [@etcetc](https://forum.4ms.info/u/etcetc)\
**Post date:** [February 4, 2025, 2:57am UTC](https://forum.4ms.info/t/normalization-utilities-for-metamodule/1032/1 "2025-02-04T02:57:41Z")

</div>

Hi - not sure if there is already a way to do this, but I’d love to do the following with minimal CPU overhead. I feel like it’s a waste of CPU resources to try to use a voltage source on VCV and map a knob to a constant voltage source. Not to mention then adding summing logic with a in-jack so that I can allow a knob and a input to control an input simultaneously.

Would be awesome if there were some extremely CPU-light normalization utilities or plugins where I can easily create normalization schemes, i.e.

- Knob and input jack add input voltages together
- Knob becomes attenuverter for input jack if input jack has signal

---

<div class="post-metadata">

**Author:** ![offthesky](https://forum.4ms.info/user_avatar/forum.4ms.info/offthesky/32/163_2.png) [@offthesky](https://forum.4ms.info/u/offthesky)\
**Post date:** [February 4, 2025, 7:39pm UTC](https://forum.4ms.info/t/normalization-utilities-for-metamodule/1032/2 "2025-02-04T19:39:37Z")

</div>

a v similar request perhaps:

> [@Gain settings on cv inputs, for line level instruments](https://forum.4ms.info/t/gain-settings-on-cv-inputs-for-line-level-instruments/304):
>
> i’m working with a live setup where i want to send a lot of line level instruments, ios devices, keyboards, contact mics etc into the mm and am having to use a lot of bog offset modules to scale up their audio signals in the patch. could be cool at some point to have an option on each input inside the patch to add a simple digital gain boost(simple multiply?), instead of having to waste cpu via a bunch of scale modules. or maybe a right click on the metamodule in vcv could have an option for pe…

but yeah, anywhere we can save on cpu (attenuverter on inputs/outputs), all for it!
