# Elastika Metal Resonance

**URL:** <https://forum.4ms.info/t/elastika-metal-resonance/1162>\
**Category:** Patch Gallery\
**Tags:** 4mscompanypatch\
**Created:** [February 28, 2025, 7:06pm UTC](https://forum.4ms.info/t/elastika-metal-resonance/1162 "2025-02-28T19:06:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kira4ms](https://forum.4ms.info/letter_avatar_proxy/v4/letter/k/85f322/32.png) [@kira4ms](https://forum.4ms.info/u/kira4ms)\
**Post date:** [February 28, 2025, 7:06pm UTC](https://forum.4ms.info/t/elastika-metal-resonance/1162/1 "2025-02-28T19:06:55Z")

</div>

**External Audio Path:**  
-Main audio outputs on channel 1 and 2

**Internal Audio Path:**

-A VCO’s four main wave shapes are ran into a scanner which allows the user to crossfade between different wave shapes.  
-The output of the crossfader goes into a shaped dual envelope VCA where a simple decay envelope is applied.  
-The patch then runs into an Elastika Sapphire, where modal synthesis is applied.  
-The output of the sapphire is ran through a dry/wet with the output of the VCO.  
-The output of the crossfader then runs into a Mid/Side encoder/decoder to manipulate the stereo field.  
-The output of the Mid/Side is fed into a valley plateau reverb  
-The entire patch then goes through a limiter for volume protection.

**Internal CV Path:**  
-Two triangle wave LFOs are cross modulated with one another and are processed by a sample and hold (LFO1 = clock, LFO2 = sample).  
-Before LFO2 hits the sample and hold it is crossfed with white noise to allow random deviations of voltage to be sampled.  
-The output of the S&H is used to control the pitch of VCO as well as scramble all of the parameters on the Elastika Sapphire.

**MetaModule knob mappings:**

A - LFO1 Frequency (clock)  
B - LFO2 Frequency (sample)  
C - LFO1 CV attenuverter  
D - LFO2 CV attenuverter  
E - Triangle/white noise crossfader for sample and hold  
F - VCO main frequency  
U - VCO attenuverter  
V - Waveshape: crossfader for main waveshapes of VCO.  
W - Decay time for main VCO pitch  
X - Dry/Wet for Elastika.  
Y - Reverb Dry/Wet  
Z - Reverb decay time.

[Lastiksteppa.vcv](https://forum.4ms.info/uploads/short-url/is8MpggO7EYQk5GCM0Pr5d14DST.vcv) (4.0 KB)  
[Lastiksteppa.yml](https://forum.4ms.info/uploads/short-url/vRs6wADG9NVi8roJiF3RL9vj0hn.yml) (14.0 KB)

 ![LastikSteppa Screenshot](https://forum.4ms.info/uploads/default/original/1X/fdd262074812924f036615f91b3aac2cc56113a4.jpeg)

---

<div class="post-metadata">

**Author:** ![Ross](https://forum.4ms.info/user_avatar/forum.4ms.info/ross/32/662_2.png) [@Ross](https://forum.4ms.info/u/Ross)\
**Post date:** [October 20, 2025, 8:07pm UTC](https://forum.4ms.info/t/elastika-metal-resonance/1162/3 "2025-10-20T20:07:48Z")

</div>

The files for this post have been updated so that they automatically select the recommended sample rate and block size for this patch of 32k/512. Enjoy! 😃

---

<div class="post-metadata">

**Author:** ![gkillmaster](https://forum.4ms.info/letter_avatar_proxy/v4/letter/g/838e76/32.png) [@gkillmaster](https://forum.4ms.info/u/gkillmaster)\
**Post date:** [November 1, 2025, 9:56am UTC](https://forum.4ms.info/t/elastika-metal-resonance/1162/4 "2025-11-01T09:56:21Z")

</div>

I love this patch, thank you!
